Homepage
The RCL07 call receiver has two channels. One channel is used for the operating modes and the switching functions. The second channel is activated when it receives an undervoltage telegram.

A LED lights up when the RCL07 receives a telegram from a call transmitter and the receiver switches according to the selected operating mode.

If the acknowledgment function is activated, receipt of an incoming call can be acknowledged using a programmed acknowledgment transmitter or directly on the RCL07.

With the care function, the call function can be muted for 15 minutes.

The RCL07 is also able to evaluate undervoltage telegrams signaling that the batteries in compatible radio transmitters are too low.

RCL07E5002B30
Technical specifications
Coding Easywave
32 CALL, 8 ACKNOWLEDGE and 8 CARE transmitters can be programmed.
Frequency 868,30 MHz
Channels 2
Power supply 12-24 V AC
12-32 V DC
Power consumption 10 mA standby
45 mA load (both relays are switched)
Functions CALL function
ACKNOWLEDGE function
CARE function
battery undervoltage detection
Outputs 2 potential-free relay contacts
1x changeover contact: call
1x normally open contact: battery undervoltage
Max. contact ratings AC
  switching voltage:
  switching current:
  switching power:		 (Ω)
120V AC
1A
62W
Max. contact rating DC
  switching voltage:
  switching current:
  switching power:
50V DC
1A
30W
Protection degree IP54 (with installed ø 5,30mm cable)
Operating temperature -20 °C to +60 °C
Dimensions (W/L/H) 35/80/20 mm
Color white similar to RAL 9003
Scope of delivery
  • Call receiver
  • Operating manual
Models
Product number Description
RCL07E5002B30 Call receiver, Easywave, 12-24VAC / 12-32VDC, potential-free, IP54, batttery low, external programming, white
Wiring diagram